User Tools

Site Tools


wiki:repositories:archives:debian

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
wiki:repositories:archives:debian [2016/09/21 06:07]
ionic Copy from wiki:repositories:debian
wiki:repositories:archives:debian [2019/09/12 17:33] (current)
ionic Fix page.
Line 1: Line 1:
-====== X2Go Packages for Debian GNU/Linux ======+====== ​Archived ​X2Go Packages for Debian GNU/Linux ======
  
-To get started you'll need to configure your local system to access ​the official X2Go Debian repository. ​Please keep in mind that this installation manual will guide you through ​the installation on a Debian wheezy (jessie, sid) systemThe repository ​will basically offer you packages for i386 and amd64 architectures.+Alongside with the instructions on [[wiki:​repositories:​debian|the main Debian repository ​page]], we provide a repository archive for archived X2Go Debian packages for deprecated Debian GNU/Linux releasesThese are provided ​in the state they were in after their last successful buildThis repository ​is not updated at all, other than when a new Debian GNU/Linux release version is deprecated.
  
-__Exceptions:​__+===== Adding this Repository to Your Package System =====
  
-  * **Debian lenny:** If you really use X2Go under Debian lenny and require us to provide recent X2Go versions for lenny, then you have to contract us to do that. The lenny packages will be removed from our archives at the end of 2013. +==== Bootstrapping ​the Repository GPG Keys ====
-  * **Debian squeeze: **X2Go packages will be offered for Debian squeeze at least until squeeze is still officially supported as ''​oldstable''​ by the Debian project. +
-  * **ARM architecture:​** for Debian squeeze and wheezy on ARM-based (Debian/​armel) devices we provide (currently outdated) client-side packages (x2goclient,​ pyhoca-gui, pyhoca-cli plus dependencies). No nightly-builds,​ no server packages, though.+
  
-===== Adding this Repository ​to your Package System =====+Make sure to either have installed the ''​x2go-keyring''​ package previously or add the GPG key as described on [[wiki:​repositories:​debian#​bootstrapping_the_repository_gpg_keys|the main Debian repository page]].
  
-Before starting to edit your system configuration,​ you'll need to add the needed GPG keys of the repository. Please switch to a user which has administrator privileges on your system in your preferred command line client:+==== Adding ​the Actual Repository ====
  
-<code bash> +=== Changing Existing Entries ===
-su - +
-</​code>​ +
-or +
-<code bash> +
-sudo -s +
-</​code>​+
  
 +If you already have the X2Go Debian Repository in your apt sources, the only thing you need to do is changing the repository address from ''​packages.x2go.org''​ to ''​archives.packages.x2go.org''​.
  
-The following commands will ensure that your system will be able to work with the repository archive key. We have also provided our archive key and the X2Go maintainers'​ keys in keyring package called ''​x2go-keyring''​ (see below). If you choose to install that package you can skip these first steps...+=== Adding ​New Repository ===
  
-<code bash> +If this is a new installation on a fresh machine, follow these steps. Note, that these packages are completely unmaintained and bug reports will not be accepted. This also holds for security-related issues.
-$ apt-key adv --recv-keys --keyserver keys.gnupg.net E1F958385BFE2B6E +
-</​code>​+
  
- +Please add the file ''​x2go-archive.list''​ to the folder ''/​etc/​apt/​sources.list.d/''​.
-Please add the file ''​x2go.list''​ to the folder ''/​etc/​apt/​sources.list.d/''​.+
 This can be done by using your preferred editor. This can be done by using your preferred editor.
 +
 +<​note>​If you have not gotten a directory named ''/​etc/​apt/​sources.list.d/''​ add the lines to ''/​etc/​apt/​sources.list''​.</​note>​
  
 <code bash> <code bash>
-$ editor /​etc/​apt/​sources.list.d/​x2go.list+$ editor /​etc/​apt/​sources.list.d/​x2go-archive.list
 </​code>​ </​code>​
  
-Then add the X2Go repository (binaries and sources) as a couple of new lines (example for Debian **jessie**):+Then add the Archived ​X2Go Packages ​repository (binaries and sources) as a couple of new lines (example for Debian **squeeze**):
  
-<file - x2go.list>​ +<file - x2go-archive.list> 
-# X2Go Repository (release builds) +Archived ​X2Go Packages ​Repository (release builds) 
-deb http://​packages.x2go.org/​debian ​jessie ​main +deb http://archives.packages.x2go.org/​debian ​squeeze extras ​main 
-# X2Go Repository (sources of release builds) +Archived ​X2Go Packages ​Repository (sources of release builds) 
-deb-src http://​packages.x2go.org/​debian ​jessie ​main+deb-src http://archives.packages.x2go.org/​debian ​squeeze extras ​main
  
-# X2Go Repository (nightly builds) +Archived ​X2Go Packages Repository (Saimaa ESR builds) 
-#deb http://​packages.x2go.org/​debian ​jessie ​heuler +#deb http://​archives.packages.x2go.org/​debian squeeze extras saimaa 
-# X2Go Repository (sources of nightly builds) +# Archived X2Go Packages Repository (sources of Saimaa ESR builds) 
-#deb-src http://​packages.x2go.org/​debian ​jessie ​heuler+#deb-src http://​archives.packages.x2go.org/​debian squeeze extras saimaa 
 + 
 +# Archived X2Go Packages ​Repository (nightly builds) 
 +#deb http://archives.packages.x2go.org/​debian ​squeeze extras ​heuler 
 +Archived ​X2Go Packages ​Repository (sources of nightly builds) 
 +#deb-src http://archives.packages.x2go.org/​debian ​squeeze extras ​heuler
 </​file>​ </​file>​
  
 +**Edit this new data** and make sure to uncomment desired components and comment non-desired components. Only one group may be active at a given time.
  
-**Note:** If you have not got a folder ​''​/​etc/​apt/​sources.list.d/​'' ​add the lines to ''​/​etc/​apt/​sources.list''​.+<note warning>​While we do offer pseudo-codenames like ''​oldstable'',​ ''​stable'',​ ''​testing''​ and ''​unstable''​ for convenience,​ you **should not use them**. Our pseudo-codename setup is not guaranteed to be in sync with Debian's releases, so using the ''​stable'' ​codename might mean that you will actually get packages for what Debian calls ''​oldstable'' after a new Debian distro release for a considerable amount of time.</​note>​
  
 +<note warning>​Switching between components usually requires uninstalling all X2Go packages first! The only upgrade path that is considered somewhat safe is main (release packages) to heuler (nightly packages), but there are no guarantees regarding the stability or usefulness of nightly packages.</​note>​
 +
 +==== Synchronize the Newly Added or Changed Repository'​s Metadata ====
  
 Please perform an update of your APT package database: Please perform an update of your APT package database:
Line 60: Line 61:
 </​code>​ </​code>​
  
-After the update you should be able to access the X2Go packages via the apt command family. As a first action you should install our ''​x2go-keyring''​ package and refresh the apt cache:+<note important>​If you were unable to bootstrap the repository GPG key previously, apt-get will fail to validate the signatures and discard the downloaded repository metadata. 
 +\\ \\  
 +**Not being able to verify signatures means that any content downloaded from the remote location could be injected/​offered by a malicious third party and need not come from the X2Go Project. This includes repository metadata and any packages downloaded from unauthenticated repositories. Installing the x2go-keyring package from an unauthenticated repository bears the chance that this is not our package but a malicious third-party one which will not contain our public keys. This holds for all packages installed from this repository, now and later.** 
 +\\ \\  
 +You can bypass apt's internal checks **if you understand the implications** and are ready to take the risk by **once** using: 
 +\\ \\  
 +<code bash> 
 +$ apt-get update --allow-insecure-repositories 
 +</​code>​ 
 + 
 +Otherwise, please try to first fetch the key again as outlined in the bootstrapping instructions. 
 +</​note>​ 
 + 
 +After the update you should be able to access the archived ​X2Go packages via the apt command family. As a first action you should install our ''​x2go-keyring''​ package and refresh the apt cache:
  
 <code bash> <code bash>
Line 66: Line 80:
 </​code>​ </​code>​
  
-Now you can search for X2Go related ​package ​that are now available for your APT system:+==== Post-Addition Test ==== 
 + 
 +Now you can search for archived ​X2Go related ​packages ​that are now available for your APT system:
  
 <code bash> <code bash>
Line 72: Line 88:
 </​code>​ </​code>​
  
-Congratulations,​ you are now able to access the X2Go packages. You may continue by installing x2goserver, x2goclient or pyhoca-gui or any other of the available packages.+Congratulations,​ you are now able to access the archived ​X2Go packages. You may continue by installing x2goserver, x2goclient or pyhoca-gui or any other of the available packages.
  
  
-===== Mirroring ​this Repository =====+===== Mirroring ​This Repository =====
  
 The packages in this repository can be mirrored via ''​rsync'':​ The packages in this repository can be mirrored via ''​rsync'':​
  
 <​code>​ <​code>​
-rsync -avP packages.x2go.org::​debian </​dest/​path/​of/​local/​mirror/​debian>​+rsync -avP packages.x2go.org::​debian-archive ​</​dest/​path/​of/​local/​mirror/​debian-archive>
 </​code>​ </​code>​
wiki/repositories/archives/debian.1474438020.txt.gz · Last modified: 2016/09/21 06:07 by ionic