Differences

This shows you the differences between two versions of the page.

--- wiki:development:build-howto-mswin:pyhoca-gui [2011/12/13 10:40]
dickkniep
+++ wiki:development:build-howto-mswin:pyhoca-gui [2015/01/24 13:59] (current)
mikedep333 [Downloading Software Packages] temporary link for pycrypto at version 2.6.1
@@ Line 3: / Line 3: @@
 To make development of pyhoca possible, you need several tools.
-Pyhoca is written in python and the gui is written in wxpython. You should decide whether you want to build for 32 or for 64 bit. Because all tools should
+Pyhoca is written in python and the gui is written in wxpython. Currently due to problems with the winrandom package, it is only possible to generate a 32 bit version of pyhoca. When installing, please keep the order given here
+===== System Preparations =====
+==== Downloading Software Packages ====
   * python 2.7       http://www.python.org
-  * wxpython 2.9     http://www.wxpython.org
+  * Msysgit          http://msysgit.github.io/
-  * paramiko         http://pypi.python.org/pypi/paramiko
+  * easyinstall      http://pypi.python.org/pypi/setuptools#files
-  * tortoisegit      http://code.google.com/p/msysgit/
+  * putty            http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
-  * putty
+  * Unicode NSIS     http://www.scratchpaper.com/
+  * Notepad2         http://www.flos-freeware.ch/notepad2.html (the editor we recommend for editing python files)
-One of the following X-servers.
+The follow libraries are used
+  * wxpython 3.0     http://www.wxpython.org
+  * greenlet         http://www.lfd.uci.edu/~gohlke/pythonlibs
+  * gevent           http://www.lfd.uci.edu/~gohlke/pythonlibs
+  * gmpy             http://www.lfd.uci.edu/~gohlke/pythonlibs
+  * pycrypto         http://blog.tkbe.org/archive/pre-compiled-binaries-for-pycrypto-2-6-1-py27-on-win7/
+  * win32api         http://sourceforge.net/projects/pywin32/files/pywin32/
+  * paramiko         c:\Python27\Scripts\easy_install --always-unzip paramiko
+  * wmi              c:\Python27\Scripts\easy_install --always-unzip wmi
+  * python-requests  c:\Python27\Scripts\easy_install --always-unzip requests
-  * vcxsrv
+<note>gevent 1.0rc3 is currently specified because is is the last gevent release with a windows installer.</note>
-  * xming
-  * cygwin/X
-So first make sure these tools are available on your system.
+PyHoca-GUI uses one of the below freezers (i.e. tools to generate a pyhoca-gui.exe plus programme/data folder):
+  * bbfreeze (default) c:\Python27\Scripts\easy_install --always-unzip bbfreeze
+  * py2exe             http://sourceforge.net/projects/py2exe/
+<note>easy install should be executed from the windows commandline!</note>
+<note important>There is an issue with MediaWiki and how double dashes are rendered. For now, do not copy and paste the arguments for paramiko and wmi. Type them manually. You need 2 dashes before "always" and 1 dash before "unzip"</note>
+==== Obtaining an X-Server for Windows (optional) ====
+One of the following X-servers (actually VcXsrv is your way to go here!!! However, its core files are included in pyhoca-contrib.git, see below).
+  * vcxsrv           http://sourceforge.net/projects/vcxsrv/files/latest/download
+  * xming            http://sourceforge.net/projects/xming/files/latest/download
+  * cygwin/X         http://www.cygwin.com/setup.exe
+==== Cloning the PyHoca related Git repositories ====
 After installation download the current code base by starting the git-bash shell and type
-''git clone git://code.x2go.org/python-x2go.git''
+  * %%git clone git://code.x2go.org/python-x2go.git%%
-''git clone git://code.x2go.org/pyhoca-gui.git''
+  * %%git clone git://code.x2go.org/pyhoca-gui.git%%
-''git clone git://code.x2go.org/pyhoca-contrib.git''
+  * %%git clone git://code.x2go.org/pyhoca-contrib.git%%
+This can best be done in the MingW32 shell that comes with the Git package. Note that pyhoca-contrib.git contains quite an amount of binary data/files. Its cloning can take a while.
+===== Test-Running PyHoca =====
+==== Adding Python to $PATH ====
+After having all installers download and installs and the Git working copies are in place, make sure the Git Bash has the python shell in its $PATH:
+<code bash>
+# presuming that you installed Python 2.7 to C:\Python27
+PATH=$PATH:/c/Python27
+</code>
+==== Installing Python X2Go ====
+Then make sure that Python X2Go is properly installed in a non-egg'ish way:
+<code bash>
+$ cd python-x2go && python setup.py install_lib && python setup.py install && cd -
+</code>
+If you want to install a special version of Python X2Go, use '''git checkout'' to get a specific version:
+<code bash>
+$ cd python-x2go && git checkout <the-version-you-want> && cd -
+</code>
+A list of available versions can be listed with ''git tag'' executed in the ''python-x2go'' directory.
+==== Choosing the PyHoca-GUI Version ====
+Before testing/building PyHoca-GUI, you may want to choose the version of PyHoca-GUI to use, use ''git checkout'' to get a specific version:
+<code bash>
+$ cd pyhoca-gui && git checkout <the-version-you-want> && cd -
+</code>
+A list of available versions can be listed with ''git tag'' executed in the ''pyhoca-gui'' directory.
+If you want to test/build bleeding edge code,  build PyHoca-GUI from the master branch.
+As the development of PyHoca-GUI is closely entangled with the development of Python X2Go, for bleeding edge code it is recommended to use the master branches of both projects.
+<code bash>
+$ cd python-x2go && git checkout master && cd -
+$ cd python-x2go && python setup.py install_lib && python setup.py install && cd -
+$ cd pyhoca-gui && git checkout master && cd -
+</code>
+==== Launching PyHoca-GUI from the Cmdline ====
+A test launch of PyHoca-GUI can now be done with this command:
+<code bash>
+$ cd pyhoca-gui
+$ ./pyhoca-gui --start-xserver --lang=<your-lang-shortcut>
+</code>
+(... where <your-lang-shortcut> can be de, nl, da, etc.). If the ''--lang'' parameter is omitted, the application will run in English.
+===== Building the Windows Installer Setup =====
+To build a MS Windows Installer (32-bit) of PyHoca-GUI, run the following command:
+<code bash>
+$ cd pyhoca-gui
+$ python setup.py build_exe
+</code>

X2Go - everywhere@home

User Tools

Site Tools

Differences

Page Tools