Differences

This shows you the differences between two versions of the page.

--- wiki:development:build-howto-linux:x2goserver [2011/11/15 11:14]
sunweaver
+++ wiki:development:build-howto-linux:x2goserver [2013/03/08 13:31]
@@ Line 1: / Line 1: @@
-====== Build X2GoServer for GNU/Linux ======
-//... esp. applies to installation on the Linux-From-Scratch distribution.//
-===== General Information =====
-Make sure you have read these wiki pages / installed recommended software / development libraries:
-  * non-X2Go runtime dependencies:
-    * lsof
-    * openssh-client
-    * openssh-server
-    * libconfig-simple-perl
-    * makepasswd
-    * libdbd-pg-perl
-    * libdbd-sqlite3-perl
-    * xauth
-  * X2Go runtime dependencies:
-    * x2goagent
-    * NX libraries
-Note: X2GoServer is not dependent on perl-suid anymore (as Perl SUID has been removed from Perl >=5.12.x).
-Installation: For an insight in basic post-installation procedures please take a look at the ''INSTALL'' file in the base directory of the ''x2goserver'' code project. The latest version of this INSTALL file can be found in our [[http://code.x2go.org/gitweb?p=x2goserver.git;a=blob;f=INSTALL|Git repository]].
-Deinstallation: For deinstallation please refer to the ''UNINSTALL'' file in the base directory of the ''x2goserver'' code project. The latest version of this UNINSTALL file can also be found in our [[http://code.x2go.org/gitweb?p=x2goserver.git;a=blob;f=UNINSTALL|Git repository]].
-===== Build Recipes =====
-**Run the following commands as a regular, non-root user.  You'll need the root password to install them.**
-**1.
-Create the necessary group and user**
-<note>Make sure you already have a group called **fuse**</note>
-<code>
-$ su -c "groupadd --system x2gouser && groupadd --system x2goprint &&
-useradd --system --no-create-home --shell /bin/false --home /var/lib/x2go -g x2gouser x2gouser &&
-usermod -a -G fuse <each user who'll connect to this x2go server>"
-</code>
-**2.
-Install makepasswd**
-<code>
-$ wget http://people.defora.org/~khorben/projects/makepasswd-0.5.0.tar.gz
-$ tar xf makepasswd-0.5.0.tar.gz
-$ cd makepasswd-0.5.0
-$ make
-$ su -c "make PREFIX=/usr install"
-</code>
-**3.
-Install man2html**
-<code>
-$ wget http://dcssrv1.oit.uci.edu/indiv/ehood/tar/man2html3.0.1.tar.gz
-$ tar xf man2html3.0.1.tar.gz
-$ cd man2html3.0.1
-$ su -c "sed 's,/local,,g' man2html > /usr/bin/man2html &&
-sed 's,/local,,g' man.cgi > /usr/bin/man.cgi &&
-cp doc/man2html.1 /usr/share/man/man1/ &&
-chown root:root /usr/bin/man2html /usr/bin/man.cgi /usr/share/man/man1/man2html.1 &&
-chmod 755 /usr/bin/man2html /usr/bin/man.cgi"
-</code>
-**4.
-Install perl module Config-Simple**
-<code>
-$ wget http://search.cpan.org/CPAN/authors/id/S/SH/SHERZODR/Config-Simple-4.59.tar.gz
-$ tar xf Config-Simple-4.59.tar.gz
-$ cd Config-Simple-4.59
-$ perl Makefile.PL
-$ make
-$ su -c "make install"
-</code>
-**5.
-Install perl module DBI**
-<code>
-$ wget http://search.cpan.org/CPAN/authors/id/T/TI/TIMB/DBI-1.615.tar.gz
-$ tar xf DBI-1.615.tar.gz
-$ cd DBI-1.615
-$ perl Makefile.PL
-$ make
-$ su -c "make install"
-</code>
-<note>Here you need to decide if you need a single-server or multiple-server setup.
-If you pick a single-server setup, you need to install sqlite.  Follow the installation instructions at [[http://www.linuxfromscratch.org/blfs/view/svn/server/sqlite.html|BLFS]].
-If you pick a multiple-server setup, you need to install postgresql.  Follow the installation instructions at [[http://www.linuxfromscratch.org/blfs/view/svn/server/postgresql.html|BLFS]].</note>
-**6.
-Install perl module DBD-SQLite (for a single-server setup)**
-<code>
-$ wget http://search.cpan.org/CPAN/authors/id/A/AD/ADAMK/DBD-SQLite-1.33.tar.gz
-$ tar xf DBD-SQLite-1.33.tar.gz
-$ cd DBD-SQLite-1.33
-$ perl Makefile.PL
-$ make
-$ su -c "make install"
-</code>
-**7.
-Install perl module DBD-Pg (for a multiple-server setup)
-(TODO: Someone please verify this)**
-<code>
-$ wget http://search.cpan.org/CPAN/authors/id/T/TU/TURNSTEP/DBD-Pg-2.18.1.tar.gz
-$ tar xf DBD-Pg-2.18.1.tar.gz
-$ cd DBD-Pg-2.18.1
-$ perl Makefile.PL
-$ make
-$ su -c "make install"
-</code>
-**8.
-Install NoMachine's NX libraries, described [[:wiki:development:build-howto-linux:nx-libs|here]].
-**9.
-Install x2goagent from git**
-<code>
-$ su -c "rm -fr /usr/lib/x2go &&
-mkdir -p /usr/lib/x2go"
-$ git clone git://code.x2go.org/x2goagent
-$ cd x2goagent
-$ make World
-$ su -c "cp -a lib/Xext/libXext.so* /usr/lib/x2go/ &&
-cp -a lib/X11/libX11.so* /usr/lib/x2go/ &&
-cp -a lib/Xpm/libXpm.so* /usr/lib/x2go/ &&
-cp -a lib/Xrender/libXrender.so* /usr/lib/x2go/ &&
-cp -a lib/Xfixes/libXfixes.so* /usr/lib/x2go/ &&
-cp -a lib/Xtst/libXtst.so* /usr/lib/x2go/ &&
-cp -a lib/Xdamage/libXdamage.so* /usr/lib/x2go/ &&
-cp -a lib/Xrandr/libXrandr.so* /usr/lib/x2go/ &&
-cp -a lib/Xcomposite/libXcomposite.so* /usr/lib/x2go/ &&
-chown -R root:root /usr/lib/x2go &&
-install -m755 programs/Xserver/x2goagent /usr/bin/x2goagent.original"
-</code>
-<note tip>Use **make -j <number of cpus> World** to speed up the build</note>
-Now create a wrapper to call the actual x2goagent binary with the correct LD_LIBRARY_PATH
-<code>
-$ su -c "echo '#\!/bin/bash' | sed 's,\\\,,g' > /usr/bin/x2goagent &&
-echo 'X2GO_LIBS=/usr/lib/x2go LD_LIBRARY_PATH=/usr/lib/x2go exec /usr/bin/x2goagent.original \$@' >> /usr/bin/x2goagent &&
-chmod 755 /usr/bin/x2goagent"
-</code>
-**12.
-Install x2goserver from git**
-<code>
-$ git clone git://code.x2go.org/x2goserver
-$ cd x2goserver
-$ sed -i "s,/local,,g" x2goserver-compat/Makefile
-$ sed -i "s,/local,,g" x2goserver-extensions/Makefile
-$ sed -i "s,/local,,g" x2goserver/Makefile
-$ make
-$ su -c "make install &&
-chown root:x2gouser /usr/lib/x2go/x2gosqlitewrapper &&
-chmod 2755 /usr/lib/x2go/x2gosqlitewrapper
-rm -fr /var/lib/x2go/x2go_sessions &&
-/usr/sbin/x2godbadmin --createdb"
-</code>
-**13.
-Install a boot script**
-Copy this text into /etc/rc.d/init.d/x2goserver:
-<code>
-#!/bin/sh
-. /etc/sysconfig/rc
-. ${rc_functions}
-case "${1}" in
-        start)
-                boot_mesg "Starting x2go server..."
-                /usr/sbin/x2gocleansessions
-                evaluate_retval
-                ;;
-        stop)
-                boot_mesg "Stopping x2go server..."
-                killall x2gocleansessions
-                evaluate_retval
-                ;;
-        restart)
-                boot_mesg "Restarting x2go server..."
-                ${0} stop
-                sleep 1
-                ${0} start
-                ;;
-        status)
-                boot_mesg "Checking x2go status..."
-                statusproc /usr/sbin/x2gocleansessions
-                evaluate_retval
-                ;;
-        *)
-                echo "Usage: ${0} {start|stop|restart|status}"
-                exit 1
-                ;;
-esac
-# End $rc_base/init.d/x2goserver
-su -c "chmod 755 /etc/rc.d/init.d/x2goserver &&
-ln -sf ../init.d/x2goserver /etc/rc.d/rcsysinit.d/S92x2goserver &&
-ln -sf ../init.d/x2goserver /etc/rc.d/rc0.d/K28x2goserver &&
-ln -sf ../init.d/x2goserver /etc/rc.d/rc6.d/K28x2goserver"
-</code>

X2Go - everywhere@home

User Tools

Site Tools

Differences

Page Tools