X2Go - everywhere@home

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Customize NX Keyboard Shortcuts ======

===== General Remarks =====


==== About this Wiki Page ====

This Wiki page is largely a copy of the ''README.keystrokes'' in
[[http://code.x2go.org/gitweb?p=nx-libs.git;a=summary]]. Please keep them in
sync.

==== About nxagent ====

''nxagent'' is the process that an X2Go Server executes. Therefore the configuration described below
is evaluated on an **X2Go Server** and you have to place your configuration file on the **server**. 

===== Configurable Key Bindings in nxagent =====

Key bindings in the redistributed X2Go version of nxagent (aka nx-libs, NX redistributed) can now be configured
by the user. This is done via a configuration file. 

===== File Location =====

nxagent parses the first available configuration file and ignores all others.

If nxagent is called **without branding**, it searches:
  * in the location given by the ''-keystrokefile'' command line parameter
  * in the location given by the ''NXAGENT_KEYSTROKEFILE'' environment variable
  * in ''~/.nx/config/keystrokes.cfg''
  * in ''/etc/nx/keystrokes.cfg''

If nxagent is called **with X2Go branding** (i.e., as ''x2goagent''), it searches:
  * in the location given by the ''-keystrokefile'' command line parameter
  * in the location given by the ''NXAGENT_KEYSTROKEFILE'' environment variable
  * in ''~/.x2go/config/keystrokes.cfg''
  * in ''/etc/x2go/keystrokes.cfg''

If none of these files are accessible, the default configuration is used which
is the same as the old, traditional nxagent keybindings.

===== File Format =====

The configuration file is XML with the following format:

<file xml keystroke.cfg>
<!DOCTYPE NXKeystroke>
<keystrokes>
<keystroke action="fullscreen" AltMeta="1" Control="1" key="b" />
<keystroke action="minimize" AltMeta="1" Control="1" key="space" />
<keystroke action="minimize" key="Escape" Shift="1" />
<keystroke action="close_session" key="F7" />
<keystroke action="fullscreen" key="F7" Mod1="1" />
<keystroke action="fullscreen" key="F6" Mod1="1" />
<keystroke action="force_synchronization" key="f" />
<keystroke action="fullscreen" key="space" Mod1="0" Mod2="0" Control="0" Shift="0" AltMeta="0" />
</keystrokes>
</file>

Each ''action'' defines an action to be executed when receiving that keystroke. A
list of possible actions is given below. Some of those actions are only
available with debug builds of nxagent.

Keys are given as a combination of ''key'' and (optionally) a number of
modifiers. The key attribute is evaluated into a X11 key via the usual
''XStringToKeysym'' function. A list of possible keys can be found in
''/usr/include/X11/keysymdef.h'', the names are specified without the leading
''XK_''. Evaluation is case-sensitive, so, ''space'' and ''Escape'' will work while
''Space'' and ''escape'' won't.

Modifiers are given as boolean attributes, possible modifiers are ''Mod1'', ''Mod2'',
''Mod3'', ''Mod4'', ''Control'', ''Shift'', ''Lock''. Sensible combinations strongly depend on your
keyboard configuration, but usually you will need ''Mod1'' and ''Control''. Boolean in
this context means ''0'', ''false'' and an unspecified attribute are false, anything
else is considered true.

Everything in this file is case-sensitive. Unknown lines are ignored.
Keybindings are evaluated from top to bottom, so if a keybinding matches, other
keybindings further down will be ignored. The contents of the file replaces the
default keybindings, and only one file is read, no merging between different
configuration files is done. This also means that an empty or invalid configuration
file deactivates all keybindings.

===== List of possible ''action'' attributes =====

  * **close_session**
    * This terminates the session.
  * **switch_all_screens**
  * **minimize**
    * This will minimize the client window (even for fullscreen sessions.)
  * **left**
  * **up**
  * **right**
  * **down**
  * **resize**
    * This action switches between the auto-resize and viewport mode (static size). The default is auto-resize. In viewport mode one can use the 'viewport_move_up', 'viewport_move_down', 'viewport_move_left' and 'viewport_move_right' actions to move within the image.
  * **defer**
    * Works like 'ignore' to make some keys be ignored/defunct inside the session.
  * **ignore**
    * Makes it possible to add 'ignore', as in nothing happens when certain keys are pressed.
  * **fullscreen**
    * Switches the client window into or out of fullscreen mode.
  * **viewport_move_left**
    * Moves the image viewport to the left.
  * **viewport_move_up**
    * Moves the image viewport up.
  * **viewport_move_right**
    * Moves the image viewport to the right.
  * **viewport_move_down**
    * Moves the image viewport down.

Only in builds with certain debugging options enabled, ignored otherwise:
  * **force_synchronization**
    * Forces the drawing of elements to be synchronized which can fix some visual bugs.
  * **debug_tree**
  * **regions_on_screen**
  * **test_input**
  * **deactivate_input_devices_grab**
X2Go - everywhere@home

User Tools

Site Tools

Page Tools
