X2Go - everywhere@home

User Tools

Site Tools

Trace:
doc:howto:x2gobroker

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
doc:howto:x2gobroker [2017/02/10 17:28]
stefanbaur [Preseeding - Manual Steps] moved screenshots to beginning and left 		doc:howto:x2gobroker [2017/02/28 09:21] (current)
stefanbaur [pg1.x2go.example.com] - no nfs mounts on pg1
Line 1: Line 1:
 ====== X2Go Session Broker Demo Environment Setup ====== ====== X2Go Session Broker Demo Environment Setup ======
-<note important>Work in Progress - at present, session resuming doesn't work, even though it should.</note>+
 ===== Purpose of this document ===== ===== Purpose of this document =====
  
Line 66: Line 66:
 <note tip>Each entry below contains a hint regarding the minimum requirements for the individual system. If you're using virtual machines, and are low on disk space, feel free to assign sparse files/growing disk images. The systems don't really need that much space right away, but if you assign smaller sizes, the installer might become confused and partition the virtual disk in unexpected ways.</note> <note tip>Each entry below contains a hint regarding the minimum requirements for the individual system. If you're using virtual machines, and are low on disk space, feel free to assign sparse files/growing disk images. The systems don't really need that much space right away, but if you assign smaller sizes, the installer might become confused and partition the virtual disk in unexpected ways.</note>
 <note tip>If you click on the name of a preseed file, like "preseed_ldap1" below, you will be offered to download it - that's easier than copy-pasting each file.</note> <note tip>If you click on the name of a preseed file, like "preseed_ldap1" below, you will be offered to download it - that's easier than copy-pasting each file.</note>
-==== ldap1.xgo.example.com ====+==== ldap1.x2go.example.com ====
   * Minimum RAM required: 256MB   * Minimum RAM required: 256MB
   * Minimum disk space required: 4 GB   * Minimum disk space required: 4 GB
Line 231: Line 231:
  echo "COMMENT: This is for homedir autocreation." ;\  echo "COMMENT: This is for homedir autocreation." ;\
  echo -e 'session required\tpam_mkhomedir.so\tskel=/etc/skel umask=0022' >>/target/etc/pam.d/common-session ;\  echo -e 'session required\tpam_mkhomedir.so\tskel=/etc/skel umask=0022' >>/target/etc/pam.d/common-session ;\
- echo "COMMENT: This is so LDAP users are added to local groups when logging in to a remote system." ;\ + echo "COMMENT: This is so LDAP users are added to local groups when logging in to a remote system." ;\
  echo -e "auth\trequired\tpam_group.so\tuse_first_pass" >>/target/etc/pam.d/common-auth ;\  echo -e "auth\trequired\tpam_group.so\tuse_first_pass" >>/target/etc/pam.d/common-auth ;\
- echo "common-auth;*;*;A10000-2400;users,x2gousers,x2gobroker-users" >>/target/etc/security/group.conf ;\+ echo "*;*;*;Al0000-2400;users,x2gousers,x2gobroker-users" >>/target/etc/security/group.conf ;\
  echo "COMMENT: This makes sure error messages during bootup remain on screen." ;\  echo "COMMENT: This makes sure error messages during bootup remain on screen." ;\
  sed -i -e '/^1/ s/getty/getty --noclear/' /target/etc/inittab ;\  sed -i -e '/^1/ s/getty/getty --noclear/' /target/etc/inittab ;\
Line 246: Line 246:
  echo "COMMENT: about maintainability - it is to get a small, simple, static LDAP setup up" ;\  echo "COMMENT: about maintainability - it is to get a small, simple, static LDAP setup up" ;\
  echo "COMMENT: and running so you don't have to bother with LDAP when all you want to do is" ;\  echo "COMMENT: and running so you don't have to bother with LDAP when all you want to do is" ;\
- echo "COMMENT: test-drive the broker setup." \;+ echo "COMMENT: test-drive the broker setup." ;\
  echo '(cd /usr/share/migrationtools && LDAP_BASEDN="dc=x2go,dc=example,dc=com" LDAPHOST="ldap1" LDAP_BINDDN="cn=admin,dc=x2go,dc=example,dc=com" LDAP_BINDCRED="start" LDAP_PROFILE="no" LDAPADD="/usr/bin/ldapadd -c" ETC_ALIASES=/dev/null ./migrate_all_online.sh || true)' >>/target/etc/rc.local ;\  echo '(cd /usr/share/migrationtools && LDAP_BASEDN="dc=x2go,dc=example,dc=com" LDAPHOST="ldap1" LDAP_BINDDN="cn=admin,dc=x2go,dc=example,dc=com" LDAP_BINDCRED="start" LDAP_PROFILE="no" LDAPADD="/usr/bin/ldapadd -c" ETC_ALIASES=/dev/null ./migrate_all_online.sh || true)' >>/target/etc/rc.local ;\
  echo "COMMENT: This is the cleanup job for the LDAP migration, so it doesn't run more than once." ;\  echo "COMMENT: This is the cleanup job for the LDAP migration, so it doesn't run more than once." ;\
Line 331: Line 331:
 </file> </file>
  
-==== nfs1.xgo.example.com ====+==== nfs1.x2go.example.com ====
   * Minimum RAM required: 256MB   * Minimum RAM required: 256MB
   * Minimum disk space required: 20 GB   * Minimum disk space required: 20 GB
Line 488: Line 488:
  echo "COMMENT: This is for homedir autocreation." ;\  echo "COMMENT: This is for homedir autocreation." ;\
  echo -e 'session required\tpam_mkhomedir.so\tskel=/etc/skel umask=0022' >>/target/etc/pam.d/common-session ;\  echo -e 'session required\tpam_mkhomedir.so\tskel=/etc/skel umask=0022' >>/target/etc/pam.d/common-session ;\
- echo "COMMENT: This is so LDAP users are added to local groups when logging in to a remote system." ;\ + echo "COMMENT: This is so LDAP users are added to local groups when logging in to a remote system." ;\
  echo -e "auth\trequired\tpam_group.so\tuse_first_pass" >>/target/etc/pam.d/common-auth ;\  echo -e "auth\trequired\tpam_group.so\tuse_first_pass" >>/target/etc/pam.d/common-auth ;\
- echo "common-auth;*;*;A10000-2400;users,x2gousers,x2gobroker-users" >>/target/etc/security/group.conf ;\+ echo "*;*;*;Al0000-2400;users,x2gousers,x2gobroker-users" >>/target/etc/security/group.conf ;\
  echo "COMMENT: This makes sure error messages during bootup remain on screen." ;\  echo "COMMENT: This makes sure error messages during bootup remain on screen." ;\
  sed -i -e '/^1/ s/getty/getty --noclear/' /target/etc/inittab ;\  sed -i -e '/^1/ s/getty/getty --noclear/' /target/etc/inittab ;\
Line 549: Line 549:
 </file> </file>
  
-==== pg1.xgo.example.com ====+==== pg1.x2go.example.com ====
   * Minimum RAM required: 256MB   * Minimum RAM required: 256MB
   * Minimum disk space required: 20 GB   * Minimum disk space required: 20 GB
Line 704: Line 704:
  echo "COMMENT: This is for homedir autocreation." ;\  echo "COMMENT: This is for homedir autocreation." ;\
  echo -e 'session required\tpam_mkhomedir.so\tskel=/etc/skel umask=0022' >>/target/etc/pam.d/common-session ;\  echo -e 'session required\tpam_mkhomedir.so\tskel=/etc/skel umask=0022' >>/target/etc/pam.d/common-session ;\
- echo "COMMENT: This is so LDAP users are added to local groups when logging in to a remote system." ;\ + echo "COMMENT: This is so LDAP users are added to local groups when logging in to a remote system." ;\
  echo -e "auth\trequired\tpam_group.so\tuse_first_pass" >>/target/etc/pam.d/common-auth ;\  echo -e "auth\trequired\tpam_group.so\tuse_first_pass" >>/target/etc/pam.d/common-auth ;\
- echo "common-auth;*;*;A10000-2400;users,x2gousers,x2gobroker-users" >>/target/etc/security/group.conf ;\+ echo "*;*;*;Al0000-2400;users,x2gousers,x2gobroker-users" >>/target/etc/security/group.conf ;\
  echo "COMMENT: This makes sure error messages during bootup remain on screen." ;\  echo "COMMENT: This makes sure error messages during bootup remain on screen." ;\
  sed -i -e '/^1/ s/getty/getty --noclear/' /target/etc/inittab ;\  sed -i -e '/^1/ s/getty/getty --noclear/' /target/etc/inittab ;\
- echo "COMMENT: This is so /home gets mounted from nfs1" ;\ 
- echo -e 'nfs1:/export/home\t/home\tnfs\tsoft,intr,rsize=8192,wsize=8192\t0\t0' >>/target/etc/fstab ;\ 
  echo "COMMENT: This is so dnsmasq on ldap1 is queried for DNS first" ;\  echo "COMMENT: This is so dnsmasq on ldap1 is queried for DNS first" ;\
  sed 's/#prepend domain-name-servers 127.0.0.1;/prepend domain-name-servers 192.168.154.146;/' -i /target/etc/dhcp/dhclient.conf ;\  sed 's/#prepend domain-name-servers 127.0.0.1;/prepend domain-name-servers 192.168.154.146;/' -i /target/etc/dhcp/dhclient.conf ;\
Line 774: Line 772:
 </file> </file>
  
-==== x2gobroker1.xgo.example.com ====+==== x2gobroker1.x2go.example.com ====
   * Minimum RAM required: 256MB   * Minimum RAM required: 256MB
   * Minimum disk space required: 4 GB   * Minimum disk space required: 4 GB
Line 897: Line 895:
 # sources.list line will be left commented out # sources.list line will be left commented out
  
-# CHANGE THIS - you need to download this keyfile onto your web server +# When this key doesn't work any more, switch entries 
-# run these gpg commands to download it: +#d-i apt-setup/local0/key string http://packages.x2go.org/pub.key 
-# gpg --keyserver keys.gnupg.net --recv-keys E1F958385BFE2B6E +d-i apt-setup/local0/key string http://packages.x2go.org/debian-old-pub.key
-# gpg -a --export E1F958385BFE2B6E > x2go.key.gpg +
-d-i apt-setup/local0/key string http://192.168.0.224/x2go.key.gpg+
  
 # Task and Package Selection # Task and Package Selection
Line 927: Line 923:
 x2gobroker-authservice \ x2gobroker-authservice \
 x2gobroker-daemon \ x2gobroker-daemon \
 +x2gobroker-loadchecker \
 x2gobroker-ssh x2gobroker-ssh
  
Line 953: Line 950:
  echo "COMMENT: This is for homedir autocreation." ;\  echo "COMMENT: This is for homedir autocreation." ;\
  echo -e 'session required\tpam_mkhomedir.so\tskel=/etc/skel umask=0022' >>/target/etc/pam.d/common-session ;\  echo -e 'session required\tpam_mkhomedir.so\tskel=/etc/skel umask=0022' >>/target/etc/pam.d/common-session ;\
- echo "COMMENT: This is so LDAP users are added to local groups when logging in to a remote system." ;\ + echo "COMMENT: This is so LDAP users are added to local groups when logging in to a remote system." ;\
  echo -e "auth\trequired\tpam_group.so\tuse_first_pass" >>/target/etc/pam.d/common-auth ;\  echo -e "auth\trequired\tpam_group.so\tuse_first_pass" >>/target/etc/pam.d/common-auth ;\
- echo "common-auth;*;*;A10000-2400;users,x2gousers,x2gobroker-users" >>/target/etc/security/group.conf ;\+ echo "*;*;*;Al0000-2400;users,x2gousers,x2gobroker-users" >>/target/etc/security/group.conf ;\
  echo "COMMENT: This makes sure error messages during bootup remain on screen." ;\  echo "COMMENT: This makes sure error messages during bootup remain on screen." ;\
  sed -i -e '/^1/ s/getty/getty --noclear/' /target/etc/inittab ;\  sed -i -e '/^1/ s/getty/getty --noclear/' /target/etc/inittab ;\
Line 966: Line 963:
  echo "COMMENT: This patches the x2gobroker configuration files the way we need them to be for our demo." ;\  echo "COMMENT: This patches the x2gobroker configuration files the way we need them to be for our demo." ;\
  sed -i -e '/^host=/chost=x2goserver1.x2go.example.com,x2goserver2.x2go.example.com' /target/etc/x2go/broker/x2gobroker-sessionprofiles.conf ;\  sed -i -e '/^host=/chost=x2goserver1.x2go.example.com,x2goserver2.x2go.example.com' /target/etc/x2go/broker/x2gobroker-sessionprofiles.conf ;\
 + sed -i -e '/^fullscreen=/cfullscreen=true' /target/etc/x2go/broker/x2gobroker-sessionprofiles.conf ;\
  sed -i -e '/^#default-agent-query-mode/adefault-agent-query-mode=SSH' /target/etc/x2go/x2gobroker.conf ;\  sed -i -e '/^#default-agent-query-mode/adefault-agent-query-mode=SSH' /target/etc/x2go/x2gobroker.conf ;\
  sed -i -e '/^#default-use-load-checker/adefault-use-load-checker=true' /target/etc/x2go/x2gobroker.conf ;\  sed -i -e '/^#default-use-load-checker/adefault-use-load-checker=true' /target/etc/x2go/x2gobroker.conf ;\
Line 994: Line 992:
  sed -i -e '/^command=SHADOW/aacl-groups-deny=ALL' /target/etc/x2go/broker/x2gobroker-sessionprofiles.conf ;\  sed -i -e '/^command=SHADOW/aacl-groups-deny=ALL' /target/etc/x2go/broker/x2gobroker-sessionprofiles.conf ;\
  sed -i -e '/^command=SHADOW/aacl-groups-allow=group-shadow' /target/etc/x2go/broker/x2gobroker-sessionprofiles.conf ;\  sed -i -e '/^command=SHADOW/aacl-groups-allow=group-shadow' /target/etc/x2go/broker/x2gobroker-sessionprofiles.conf ;\
 + echo "COMMENT: These patches fix bugs that are still present in the current stable release" ;\
 + sed -i -e 's/if pam.pam:/if hasattr(pam, "pam"):/' /target/usr/sbin/x2gobroker-authservice /target/usr/lib/python2.7/dist-packages/x2gobroker/authmechs/pam_authmech.py ;\
 + sed -i -e "s/'hostname'/'hostaddr'/" /target/usr/sbin/x2gobroker-testagent ;\
 + echo "COMMENT: This enables the HTTP Session Broker for SystemD and SysVinit systems" ;\
 + sed -i '/#DAEMON_BIND_ADDRESS=127.0.0.1:8080/aDAEMON_BIND_ADDRESS=*:8080' /target/etc/default/x2gobroker-daemon /target/etc/x2go/broker/defaults.conf ;\
  echo "COMMENT: This patches rc.local so the following set of commands is run" ;\  echo "COMMENT: This patches rc.local so the following set of commands is run" ;\
  echo "COMMENT: exactly *once* - at the first boot after installation." ;\  echo "COMMENT: exactly *once* - at the first boot after installation." ;\
Line 1003: Line 1006:
  echo "COMMENT: This is the cleanup job for the dpkg-reconfigure call, so it doesn't run more than once." ;\  echo "COMMENT: This is the cleanup job for the dpkg-reconfigure call, so it doesn't run more than once." ;\
  echo 'sed -i -e "/dpkg/d" /etc/rc.local' >>/target/etc/rc.local ;\  echo 'sed -i -e "/dpkg/d" /etc/rc.local' >>/target/etc/rc.local ;\
- echo "COMMENT: We're cheating here:" \n + echo "COMMENT: We're cheating here:" ;\ 
- echo "COMMENT: We're calling the pubkeyauthorizer on x2gobroker, rather than from each x2goserver." \; + echo "COMMENT: We're calling the pubkeyauthorizer on x2gobroker, rather than from each x2goserver." ;\ 
- echo "COMMENT: That way, we don't have to open :8080 for anything more than localhost." \;+ echo "COMMENT: That way, we don't have to open :8080 for anything more than localhost." ;\
  echo 'x2gobroker-pubkeyauthorizer --broker-url http://localhost:8080/pubkeys/' >>/target/etc/rc.local ;\  echo 'x2gobroker-pubkeyauthorizer --broker-url http://localhost:8080/pubkeys/' >>/target/etc/rc.local ;\
  echo "COMMENT: Now we create a directory (watch permissions/ownership!) on the NFS share, and dump the generated key file there." ;\  echo "COMMENT: Now we create a directory (watch permissions/ownership!) on the NFS share, and dump the generated key file there." ;\
Line 1062: Line 1065:
 </file> </file>
  
-==== x2goserver1.xgo.example.com ====+==== x2goserver1.x2go.example.com ====
   * Minimum RAM required: 256MB   * Minimum RAM required: 256MB
   * Minimum disk space required: 8 GB   * Minimum disk space required: 8 GB
Line 1185: Line 1188:
 # sources.list line will be left commented out # sources.list line will be left commented out
  
-# CHANGE THIS - you need to download this keyfile onto your web server +# When this key doesn't work any more, switch entries 
-# run these gpg commands to download it: +#d-i apt-setup/local0/key string http://packages.x2go.org/pub.key 
-# gpg --keyserver keys.gnupg.net --recv-keys E1F958385BFE2B6E +d-i apt-setup/local0/key string http://packages.x2go.org/debian-old-pub.key
-# gpg -a --export E1F958385BFE2B6E > x2go.key.gpg +
-d-i apt-setup/local0/key string http://192.168.0.224/x2go.key.gpg+
  
 # Task and Package Selection # Task and Package Selection
Line 1246: Line 1247:
  echo "COMMENT: This is for homedir autocreation." ;\  echo "COMMENT: This is for homedir autocreation." ;\
  echo -e 'session required\tpam_mkhomedir.so\tskel=/etc/skel umask=0022' >>/target/etc/pam.d/common-session ;\  echo -e 'session required\tpam_mkhomedir.so\tskel=/etc/skel umask=0022' >>/target/etc/pam.d/common-session ;\
- echo "COMMENT: This is so LDAP users are added to local groups when logging in to a remote system." ;\ + echo "COMMENT: This is so LDAP users are added to local groups when logging in to a remote system." ;\
  echo -e "auth\trequired\tpam_group.so\tuse_first_pass" >>/target/etc/pam.d/common-auth ;\  echo -e "auth\trequired\tpam_group.so\tuse_first_pass" >>/target/etc/pam.d/common-auth ;\
- echo "common-auth;*;*;A10000-2400;users,x2gousers,x2gobroker-users" >>/target/etc/security/group.conf ;\+ echo "*;*;*;Al0000-2400;users,x2gousers,x2gobroker-users" >>/target/etc/security/group.conf ;\
  echo "COMMENT: This makes sure error messages during bootup remain on screen." ;\  echo "COMMENT: This makes sure error messages during bootup remain on screen." ;\
  sed -i -e '/^1/ s/getty/getty --noclear/' /target/etc/inittab ;\  sed -i -e '/^1/ s/getty/getty --noclear/' /target/etc/inittab ;\
Line 1347: Line 1348:
 </file> </file>
  
-==== x2goserver2.xgo.example.com ====+==== x2goserver2.x2go.example.com ====
   * Minimum RAM required: 256MB   * Minimum RAM required: 256MB
   * Minimum disk space required: 8 GB   * Minimum disk space required: 8 GB
Line 1470: Line 1471:
 # sources.list line will be left commented out # sources.list line will be left commented out
  
-# CHANGE THIS - you need to download this keyfile onto your web server +# When this key doesn't work any more, switch entries 
-# run these gpg commands to download it: +#d-i apt-setup/local0/key string http://packages.x2go.org/pub.key 
-# gpg --keyserver keys.gnupg.net --recv-keys E1F958385BFE2B6E +d-i apt-setup/local0/key string http://packages.x2go.org/debian-old-pub.key
-# gpg -a --export E1F958385BFE2B6E > x2go.key.gpg +
-d-i apt-setup/local0/key string http://192.168.0.224/x2go.key.gpg+
  
 # Task and Package Selection # Task and Package Selection
Line 1531: Line 1530:
  echo "COMMENT: This is for homedir autocreation." ;\  echo "COMMENT: This is for homedir autocreation." ;\
  echo -e 'session required\tpam_mkhomedir.so\tskel=/etc/skel umask=0022' >>/target/etc/pam.d/common-session ;\  echo -e 'session required\tpam_mkhomedir.so\tskel=/etc/skel umask=0022' >>/target/etc/pam.d/common-session ;\
- echo "COMMENT: This is so LDAP users are added to local groups when logging in to a remote system." ;\ + echo "COMMENT: This is so LDAP users are added to local groups when logging in to a remote system." ;\
  echo -e "auth\trequired\tpam_group.so\tuse_first_pass" >>/target/etc/pam.d/common-auth ;\  echo -e "auth\trequired\tpam_group.so\tuse_first_pass" >>/target/etc/pam.d/common-auth ;\
- echo "common-auth;*;*;A10000-2400;users,x2gousers,x2gobroker-users" >>/target/etc/security/group.conf ;\+ echo "*;*;*;Al0000-2400;users,x2gousers,x2gobroker-users" >>/target/etc/security/group.conf ;\
  echo "COMMENT: This makes sure error messages during bootup remain on screen." ;\  echo "COMMENT: This makes sure error messages during bootup remain on screen." ;\
  sed -i -e '/^1/ s/getty/getty --noclear/' /target/etc/inittab ;\  sed -i -e '/^1/ s/getty/getty --noclear/' /target/etc/inittab ;\
Line 1601: Line 1600:
 </file> </file>
  
-==== x2goclient1.xgo.example.com ====+==== x2goclient1.x2go.example.com ====
   * Minimum RAM required: 256MB   * Minimum RAM required: 256MB
   * Minimum disk space required: 4 GB   * Minimum disk space required: 4 GB
Line 1724: Line 1723:
 # sources.list line will be left commented out # sources.list line will be left commented out
  
-# CHANGE THIS - you need to download this keyfile onto your web server +# When this key doesn't work any more, switch entries
-# run these gpg commands to download it: +
-# gpg --keyserver keys.gnupg.net --recv-keys E1F958385BFE2B6E +
-# gpg -a --export E1F958385BFE2B6E > x2go.key.gpg +
-#d-i apt-setup/local0/key string http://192.168.0.224/x2go.key.gpg+
 #d-i apt-setup/local0/key string http://packages.x2go.org/pub.key #d-i apt-setup/local0/key string http://packages.x2go.org/pub.key
 d-i apt-setup/local0/key string http://packages.x2go.org/debian-old-pub.key d-i apt-setup/local0/key string http://packages.x2go.org/debian-old-pub.key
Line 1791: Line 1786:
  in-target apt-get clean ;\  in-target apt-get clean ;\
  echo "COMMENT: This last step creates an X2GoClient-in-Broker-Mode desktop entry" ;\  echo "COMMENT: This last step creates an X2GoClient-in-Broker-Mode desktop entry" ;\
- mkdir /target/home/localuser/Desktop ;\ + mkdir /target/home/localuser/Desktop ;\ echo '[Desktop Entry]' >>/target/home/localuser/Desktop/x2goclient-broker-ssh.desktop ;\ 
- echo '[Desktop Entry]' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\ + echo 'Version=1.0' >>/target/home/localuser/Desktop/x2goclient-broker-ssh.desktop ;\ 
- echo 'Version=1.0' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\ + echo 'Terminal=false' >>/target/home/localuser/Desktop/x2goclient-broker-ssh.desktop ;\ 
- echo 'Terminal=false' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\ + echo 'Icon=x2goclient' >>/target/home/localuser/Desktop/x2goclient-broker-ssh.desktop ;\ 
- echo 'Icon=x2goclient' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\ + echo 'Type=Application' >>/target/home/localuser/Desktop/x2goclient-broker-ssh.desktop ;\ 
- echo 'Type=Application' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\ + echo 'Categories=Internet' >>/target/home/localuser/Desktop/x2goclient-broker-ssh.desktop ;\ 
- echo 'Categories=Internet' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\ + echo 'Exec=x2goclient --broker-url=ssh://x2gobroker1.x2go.example.com:/usr/bin/x2gobroker-ssh --add-to-known-hosts' >>/target/home/localuser/Desktop/x2goclient-broker-ssh.desktop ;\ 
- echo 'Exec=x2goclient --broker-url=ssh://x2gobroker1.x2go.example.com:/usr/bin/x2gobroker --add-to-known-hosts' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\ + echo 'Name=X2GoClient in SSH Broker Mode' >>/target/home/localuser/Desktop/x2goclient-broker-ssh.desktop ;\ 
- echo 'Name=X2GoClient in Broker Mode' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\ + echo 'GenericName=X2GoClient in SSH Broker Mode' >>/target/home/localuser/Desktop/x2goclient-broker-ssh.desktop ;\ 
- echo 'GenericName=X2GoClient in Broker Mode' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\ + echo 'Comment=Starts X2GoClient in SSH Broker Mode' >>/target/home/localuser/Desktop/x2goclient-broker-ssh.desktop ;\ 
- echo 'Comment=Starts X2GoClient in Broker Mode' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\ + echo 'StartupNotify=true' >>/target/home/localuser/Desktop/x2goclient-broker-ssh.desktop ;\ 
- echo 'StartupNotify=true' >>/target/home/localuser/Desktop/x2goclient-broker.desktop ;\+ echo '[Desktop Entry]' >>/target/home/localuser/Desktop/x2goclient-broker-http.desktop ;\ 
 + echo 'Version=1.0' >>/target/home/localuser/Desktop/x2goclient-broker-http.desktop ;\ 
 + echo 'Terminal=false' >>/target/home/localuser/Desktop/x2goclient-broker-http.desktop ;\ 
 + echo 'Icon=x2goclient' >>/target/home/localuser/Desktop/x2goclient-broker-http.desktop ;\ 
 + echo 'Type=Application' >>/target/home/localuser/Desktop/x2goclient-broker-http.desktop ;\ 
 + echo 'Categories=Internet' >>/target/home/localuser/Desktop/x2goclient-broker-http.desktop ;\ 
 + echo 'Exec=x2goclient --broker-url=http://x2gobroker1.x2go.example.com:8080/plain/inifile --add-to-known-hosts' >>/target/home/localuser/Desktop/x2goclient-broker-http.desktop ;\ 
 + echo 'Name=X2GoClient in HTTP Broker Mode' >>/target/home/localuser/Desktop/x2goclient-broker-http.desktop ;\ 
 + echo 'GenericName=X2GoClient in HTTP Broker Mode' >>/target/home/localuser/Desktop/x2goclient-broker-http.desktop ;\ 
 + echo 'Comment=Starts X2GoClient in HTTP Broker Mode' >>/target/home/localuser/Desktop/x2goclient-broker-http.desktop ;\ 
 + echo 'StartupNotify=true' >>/target/home/localuser/Desktop/x2goclient-broker-http.desktop ;\ 
  echo "End Post-Install Setup/Config"  echo "End Post-Install Setup/Config"
  
doc/howto/x2gobroker.1486747724.txt.gz · Last modified: 2017/02/10 17:28 by stefanbaur

Page Tools

Imprint & Legal Disclaimer - Data Protection & Privacy Statement
Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
GNU Free Documentation License 1.3 Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki